|
ALIGN
TRADE ITEM v. 2.0.2 |
|
|
|
|
|
This section
presents the issues
concerning code lists that users have identified in implementing the
current GS1
Trade Item Data Synchronization Standards.
It would be better for all communities to adopt one set
of code lists now. The analysis that
resulted in these code list recommendations took into account all
definitions,
examples, and business rules contained in the Trade Item BRD.
Code lists from EANCOM, UNCEFACT, ISO, ANSI
X12, VICS EDI, and UCS/WINS were also examined.
The goal was to develop code lists that reflected the intent of the
original developers of the Trade Item.
Note these code lists are
documentation only. It is envisioned
these code list will be added to as new requirements are
introduced. It is not an exclusive or all-inclusive list
but this is a living list.
External Code Lists
There are several code lists used within the EAN·UCC
system that are maintained by agencies other than
EAN·UCC. The code lists that are reference in this
section apply to several attributes within the trade item as well as
other
business message standards.
Language Code
The Trade Item BMS restricts the use to just the two
character language code as specified in ISO 639-1; these codes are
lower
case.
ISO Code Lists
The following ISO codes lists are used to represent
languages (for text attributes), Country and Subdivision (for country
of origin
and target market), and currencies (for amounts), and the source for
the code
list.
|
|
|
ISO 639-1
Codes for the representation of names of languages - Part 1:
Alpha-2 code 2002
Available from: http://www.iso.ch or http://www.loc.gov/standards/iso639-2/langcodes.html#ef
ISO 3166-1
Part 1 - Country Codes (three Digit Format)
Available from: http://www.iso.ch
ISO 3166-2 Part 2 - AlphaCountry Subdivision Code
Available from: http://www.iso.ch
ISO 4217
Codes for the representation of names of
currencies and funds 2001
Available from: http://www.iso.ch
|
|
|
GS1
has three choices for code values:
Reference an external source like
ISO.
Maintain a code list unique to the GS1
system.
Maintain a code list based on an external
code list.
Any code list GS1 maintains will need to be accessible to the
community and maintained in such a way as to be detached from the
schema
versioning. The end result is the code
lists will be managed outside of the schemas in such a way to remain
easy to
update and allow for the syntax checking of code values as is done with
enumerated lists. |
|
|
Unit of Measure
The Unit of Measure (UOM) code is used throughout the GS1
System. In order to provide the best
value to the GS1
community the UOM code list will be maintained by GS1
for its community. It is anticipated additional code values
will
be required. When the business
requirements are defined additional code values can be added.
The following is the starting point. |
|
|
|
26
|
Actual Ton
|
|
Z51
|
Application
(e.g. in hair colorant, 6 applications)
|
|
AS
|
Assortment
|
|
BG
|
Bag
|
|
BA
|
Bale
|
|
BI
|
Bar
|
|
BR
|
Barrel
|
|
BL
|
Block
|
|
B8
|
Board
|
|
BF
|
Board Feet
|
|
BO
|
Bottle
|
|
BX
|
Box
|
|
BN
|
Bulk
|
|
BD
|
Bundle
|
|
BU
|
Bushel
|
|
CN
|
Can
|
|
CG
|
Card
|
|
CT
|
Carton
|
|
CQ
|
Cartridge
|
|
CA
|
Case
|
|
C3
|
Centigram
|
|
CM
|
Centiliter
|
|
1N
|
Count
|
|
CV
|
Cover
|
|
CC
|
Cubic Centimeter
|
|
C8
|
Cubic Decimeter
|
|
CF
|
Cubic Feet
|
|
CI
|
Cubic Inches
|
|
CR
|
Cubic Meter
|
|
CO
|
Cubic Meters (Net)
|
|
MMQ
|
Cubic Milimetre
|
|
CU
|
Cup
|
|
DA
|
Days
|
|
DG
|
Decigram
|
|
DL
|
Deciliter
|
|
DM
|
Decimeter
|
|
CE
|
Degrees Celsius (Centigrade)
|
|
FA
|
Degrees Fahrenheit
|
|
DS
|
Display
|
|
DO
|
Dollars, US
|
|
DZ
|
Dozen
|
|
DR
|
Drum
|
|
EA
|
Each
|
|
EV
|
Envelope
|
|
FT
|
Feet
|
|
UZ
|
Fifty Count
|
|
UY
|
Fifty Square Feet
|
|
FO
|
Fluid Ounce
|
|
GA
|
Gallon
|
|
GR
|
Gram
|
|
GT
|
Gross Kilogram
|
|
HD
|
Half Dozen
|
|
HC
|
Houndred Count
|
|
HL
|
Houndred Feet
|
|
CW
|
Houndred Pounds (CWT)
|
|
IN
|
Inches
|
|
JR
|
Jar
|
|
KE
|
Keg
|
|
KG
|
Kilogram
|
|
DK
|
Kilometer
|
|
KT
|
Kit
|
|
LR
|
Layer(s)
|
|
LF
|
Linear Foot
|
|
LM
|
Linear Meter
|
|
LK
|
Link
|
|
LT
|
Liter
|
|
MR
|
Meter
|
|
MP
|
Metric Ton
|
|
MC
|
Microgram
|
|
4G
|
Microliter
|
|
ME
|
Miligram
|
|
ML
|
Mililiter
|
|
MM
|
Milimeter
|
|
MX
|
Mod Pallet (Mixed)
|
|
58
|
Net Kilograms
|
|
OZ
|
Ounces
|
|
PH
|
Pack
|
|
PK
|
Package
|
|
PA
|
Pail
|
|
PR
|
Pair
|
|
PL
|
Pallet
|
|
PY
|
Peck, Dry U.S.
|
|
P1
|
Percent
|
|
PC
|
Piece
|
|
PT
|
Pint
|
|
PTN
|
Portion
|
|
V2
|
Pouch
|
|
LB
|
Pounds
|
|
PE
|
Pounds Equivalent
|
|
PG
|
Pounds Gross
|
|
PN
|
Pounds Net
|
|
QT
|
Quart
|
|
QS
|
Quart, Dry
|
|
RL
|
Roll
|
|
ST
|
Set
|
|
SH
|
Sheet
|
|
SX
|
Shipment
|
|
FJ
|
Sizing Factor
|
|
SF
|
Square Foot
|
|
SM
|
Square Meter
|
|
SY
|
Square Yard
|
|
15
|
Stick
|
|
TK
|
Tank
|
|
TM
|
Thousand Feet
|
|
TE
|
Tote
|
|
NT
|
Trailer
|
|
TY
|
Tray
|
|
Z25
|
Usage (e.g. in laundry, 24 usage)
|
|
UN
|
Unit
|
|
YD
|
Yard
|
|
|
|
Additional
Classification Agency Name |
|
|
|
Attribute
Name
|
Comments
|
|
Code
|
Code
Description
|
|
additionalClassificationAgencyName
|
Part of AdditionalClassification class.
It is currently a string 1 to 35 Characters. This should be
an EAN*UCC maintained code List. Values should be:
|
|
|
UDEX,
LTD
|
|
2
|
IRI
|
|
3
|
AC
Nielsen
|
|
4
|
ECCC
Interim Class Codes
|
|
5
|
UNSPSC
– United Nations Standard Products and Services Code
|
|
|
6
|
UNSPSC
- Electronic Commerce Code Management Association
|
|
|
|
|
|
|
Color Code List
Agency |
|
|
|
Attribute
Name
|
Comments
|
|
Code
|
Code
Description
|
| ColorCodeListAgency
|
Part
of TradeItemColorDescription class It
is String 1 to 3 characters. This
should be an EAN*UCC maintained code List. Values should be:
|
| 1
|
National Retail Federation –
Standard Color & Size Codes
This
handbook provides guidelines for use in retailers' and vendors'
merchandising and communications systems.
http://www.nrf.com
|
| 2
|
PANTONE MATCHING
SYSTEM
The
definitive international reference for selecting, specifying, matching
and controlling ink colors. The PANTONE formula guide, a three-guide
set consisting of 1,114 solid PANTONE Colors on coated, uncoated and
matte stock, shows corresponding printing ink formulas for each color,
and the three-book set of solid chips provides coated, uncoated and
matte perforated tear-out chips that can be used for quality control.
Pantone®
Inc
http://www.pantone.com
|
| 3
|
PANTONE Process Color System®
Provides a comprehensive palette of more than 3,000 colors achievable
in four-color (CMYK) process printing. The PANTONE solid to process
guide compares a solid PANTONE Color to the closest possible match in
CMYK four-color process that can be achieved on a computer monitor,
output device or printing press. Other PANTONE Color Reference Guides
for the graphic arts include metallics, pastels, tints, duotones, film
and foil.
The
PANTONE Hexachrome® Color System
Pantone® Inc
http://www.pantone.com
|
| 4
|
The PANTONE Hexachrome® Color System
A
six-color ultra high quality printing process, reproduces a dynamic
range of more brilliant continuous-tone images and simulates brighter,
more vivid colors than standard four-color process printing
Pantone®
Inc
http://www.pantone.com
|
| 5
|
PANTONE TEXTILE Color System®
A
vital tool for designers in the apparel, home furnishings and interior
design industries for selecting and specifying color used in the
manufacture of textiles and fashion. The System - consisting of 1,932
colors in cotton or paper format - is ideal for assembling creative
palettes and conceptual color schemes, and for providing color
communication and control in the manufacturing process.
In January of 2001 Pantone Inc. included
the NRF Color Codes into the PANTONE TEXTILE Color System.
Pantone®
Inc
http://www.pantone.com
|
| 6
|
Assigned
by Buyer |
| 7
|
Assigned
by Seller |
|
|
|
|
|
|
Size Code List
Agency |
|
|
| Attribute Name
|
Comments
|
| Code
|
Code
Description |
| sizeCodeListAgency
|
Part
of TradeItemSizeDescription class It
is String 1 to 3 characters. This
should be an EAN*UCC maintained code List. Values should be
|
| 1
|
National
Retail Federation –
Standard
Color & Size Codes
This
handbook provides guidelines for use in retailers' and vendors'
merchandising and communications systems.
http://www.nrf.com
|
| 2 |
Assigned by Buyer
|
| 3 |
Assigned by Seller
|
|
|
|
|
|
|
Organic Trade
Item Code |
|
|
| Attribute Name
|
Comments
|
| Code
|
Code
Description |
| organicTradeItemCode
|
Part
of OrganicTradeItemCharacteristics class It
is String 1 to 35 characters. This
should be an EAN*UCC maintained code List. Values should be (as specified in the BRD)
|
| 1 |
100%
Organic |
| 2 |
Organic
(at least 95% by weight) |
| 3 |
Made
with organic ingredients (at least 70% by weight)
|
| 4 |
Some
organic ingredients (less than 70% by weight)
|
| 5 |
Not
Organic |
| 6 |
In
conversion (products presently in conversion to the organic standard)
|
| 7 |
Bio
Dynamic (a cousin to the organic system)
|
| 8 |
Disqualified
(GTINs that violate organic principles, with attributes such as
isTradeItemGeneticallyModified or isTradeItemIrradiated being true)
|
|
|
|
|
|
|
Organic
Claim Agency |
|
|
|
Attribute Name
|
Comments
|
| Code
|
Code
Description |
| organicClaimAgency
|
Part
of OrganicTradeItemCharacteristics class It
is String 1 to 35 characters. It
is still not real clear what the usage or intended usage is. This should be an EAN*UCC maintained code List. Values should be
|
| 1
|
EPA
– US Environmental Protection Agency
|
| 2
|
FSA
– UK Food Standards Agency
|
| 3
|
FDA
– US Food and Drug Agency
|
| 4
|
International
Foundation for Organic Agriculture |
|
|
|
|
|
|
Packaging
Type Code |
|
|
| Attribute Name
|
Comments
|
| Code
|
Code
Description |
| packagingTypeCode
|
Part
of PackagingType class.
It is
String 1 to 3 characters. The
BRD states “List of authorized code values based
on UN-ECE 21
Recommendations”, however the
attribute with code list table suggest a merger of ANSI DE 103 and
EANCOM DE 7065. It would be a very large list to combine DE103
and DE7065 because DE103 is a two-part list.
Recommend using ANSI DE 103 Part 1 – Packaging Form and
making it a EANUCC maintained code list. This seems to be more in-line with the intent of
this attribute and packagingMaterialCode
|
| AAA
|
Pallet,
Returnable |
| AAB
|
Splash
Blend
Splash
blending is the mixing of two gasoline products, of different octane
levels, in a tank on the delivery vehicle to produce a third blended
grade of motor fuel for resale |
| AE
|
Aerosol
|
| AMM
|
Ammo
Pack |
| AMP
|
Ampoule
|
| AT
|
Atomizer
|
| ATH
|
Attachment
In
containers and shipping devices, a component that can be added to
provide additional functionality or security as required by the
contents or method of transportation/handling
|
| BAG
|
Bag
|
| BAL
|
Bale
|
| BBL
|
Barrel
|
| BRC
|
Bracing
Material
or devices used to hold articles or sections of loads in position to
prevent shifting during transportation
|
| BDG
|
Banding
Something
that binds, ties, or encircles the package/container to secure and
maintain unit integrity |
| BDL
|
Bundle
|
| BEM
|
Beam
|
| BIC
|
Bing
Chest |
| BIN
|
Bin
|
| BLK
|
Bulk
|
|
|
|
Packaging
Type Code
|
|
|
|
Comments
|
| Code
|
Code
Description |
| BLT
|
Belting
As
pertains to containers and shipping devices, a method of securing the
contents to the conveyance device (or securing components of the
shipping device to each other) using one or more bands of flexible
material having high-tensile strength and a buckle or ratchet device
for removing slack and maintaining tension
|
| BME
|
Blister
Pack |
| BOB
|
Bobbin
|
| BOT
|
Bottle
|
| BOX
|
Box
|
| BRG
|
Barge
|
| BSK
|
Basket
or hamper |
| BXI
|
Box,
with inner container |
| BXT
|
Bucket
|
| CAB
|
Cabinet
|
| CAG
|
Cage
|
| CAN
|
Can
|
| CNA
|
Household
Goods Container, Wood |
| CAR
|
Carrier
|
| CAS
|
Case
|
| CBC
|
Containers
of Bulk Cargo |
| CBY
|
Carboy
|
| CCS
|
Can
Case |
| CG
|
Card
|
| CHE
|
Cheeses
|
| CHS
|
Chest
|
| CLD
|
Car
Load, Rail |
| CMS
|
Clamshell
|
| CNB
|
Container,
MAC-ISO, LT. WGT. 8x8x20 Foot Air |
| CNC
|
Container,
Navy Cargo Transporter |
| CND
|
Container,
Commercial Highway Lift |
| CNE
|
Container,
Engine |
| CNF
|
Container,
Multi-walled, Secured to Warehouse Pallet
|
| CNT
|
Container
|
| COL
|
Coil
|
| CON
|
Cones
|
| COR
|
Core
|
| CRD
|
Cradle
|
| CRF
|
Corner
Reinforcement
Usually
in boxes or crates, additional material or components attached to
adjacent panels to add support or prevent crushing or separation
|
| CRT
|
Crate
|
| CSK
|
Cask
|
| CTN
|
Carton
|
| CX2
|
CONEX
A
reusable container for shipment of cargo
|
| CU
|
Cup
|
| CYL
|
Cylinder
|
| DBK
|
Dry
Bulk |
| DRK
|
Double-length
Rack |
| DRM
|
Drum
|
| DSK
|
Double-length
Skid |
| DTB
|
Double-length
Tote Bin |
| DUF
|
Duffelbag
|
| EGG
|
Egg
Crating
In
containers and shipping devices, usually describes a type of interior
dunnage which allows the contents to be individually segregated,
horizontally and vertically, to provide protection during
transportation and storage |
| ENV
|
Envelope
|
| EPR
|
Edge
Protection
A
right-angle piece placed over the outermost perimeter edges of a
container to distribute pressure and prevent collapse or cutting from
banding, strapping, or handling |
| FIR
|
Firkin
|
| FLO
|
Flo-bin
|
| FRM
|
Frame
|
| FSK
|
Flask
|
| FWR
|
Forward
Reel |
| HPR
|
Hamper
|
| HPT
|
Hopper
Truck |
| HRB
|
On
Hanger or Rack in Boxes |
| HRK
|
Half-Standard
Rack |
| HTB
|
Half-Standard
Tote Bin |
| INT
|
Intermediate
Container |
| JAR
|
Jar
|
| KEG
|
Keg
|
| KIT
|
Kit
|
| KRK
|
Knockdown
Rack |
| KTB
|
Knockdown
Tote Bin |
| LAB
|
Label
Tag |
| LID
|
Lip/Top
In
packaging, the top or bottom of a container, usually the part that
closes the opening; may also be known as cap, over, or top
|
| LIF
|
Lifts
|
| LNR
|
Liners
Any
material that separates a product within a container from the basic
walls of the container |
| LOG
|
Log
|
| LSE
|
Loose
|
| LUG
|
Lug
|
| LVN
|
Lift
Van |
| MIX
|
Mixed
Container Types
More
than one type of container is included in a shipment (shipment could
consist of 3 pieces that include 1 box, 1 crate, and 1 basket)
|
| ML2
|
MILVAN
A
military owned demountable container that conforms to US and
international standards and operates in a centrally controlled fleet
for movement of military cargo |
| MPE
|
Multipack
|
| MRP
|
Multi-Roll
Pack |
| MS2
|
MSCVAN
A
commercial (leased) or Government-owned shipping container controlled
by the Military Sealift Command. |
| MXD
|
Mixed
|
| NOL
|
Noil
|
| PA
|
Packet
|
| PAF
|
Pallet
– 4 Way
A
pallet that permits entry of handling equipment on each of its four
sides |
| PAL
|
Pail
|
| PAT
|
Pallet
- 2 Way
A
pallet that permits entry of handling equipment on opposing two of its
four sides |
| PCK
|
Packed
- not otherwise specified |
| PCS
|
Pieces
|
| PIR
|
Pirns
|
| PKG
|
Package
|
| PLC
|
Primary
Lift Container
The
largest (outermost) unitized package or articles secured together that
can be handled (usually mechanically) in common shop floor/warehouse
applications as a single entity; "primary" indicates preferred or
mandatory |
| PLF
|
Platform
|
| PLN
|
Pipeline
|
| PLT
|
Pallet
|
| PO
|
Pouch
|
| POV
|
Private
Vehicle |
| PRK
|
Pipe
Rack |
| PRT
|
Partitioning
The
proceeds of applying separators or dividers
|
| PUN
|
Punnet
|
| PWT
|
Plastic-Wrapped
Tray |
| RAL
|
Rail
(Semiconductor) |
| RCK
|
Rack
|
| REL
|
Reel
|
| RFT
|
Reinforcement
In
containers and shipping devices, a component (usually temporary) added
to a container for a particular application to lend additional support
under severe applications |
| ROL
|
Roll
|
| RVR
|
Reverse
Reel |
| SAK
|
Sack
|
| SCS
|
Suitcase
|
| SHK
|
Shook
|
| SHT
|
Sheet
A
thin layer of material usually used as a pad for extra protection by
isolating/separating tiers or layers of parts within the package
|
SKD
|
Skid
|
| SKE
|
Skid,
elevating or lift truck |
| SLP
|
Slip
Sheet
Shipping
containers utilizing slip sheets, which are cardboard platforms used to
hold product for storage or transportation
|
| SLV
|
Sleeve
|
| SPI
|
Spin
Cylinders |
| SPL
|
Spool
|
| SPR
|
Separator/Divider
In
packaging, any material inserted between tiers or layers of articles to
prevent contact and provide protection
|
| SRW
|
Shrink
Wrap
In
packaging, a method of securing a unit load by placing a large "bag" of
plastic film over the components and applying heat to induce shrinkage
and cause the bag to tighten around the contents
|
| STW
|
Stretch
Wrap
In
packaging, a high-tensile plastic film, stretched and wrapped
repeatedly around a unitized load to secure and maintain unit integrity
|
| SV2
|
SEAVAN
A
commercial or government-owned (or leased) shipping container which is
moved via ocean transportation without wheels attached and is lifted on
and off a ship |
| TBE
|
Tube
|
| TBN
|
Tote
Bin |
| TKR
|
Tank
Car |
| TKT
|
Tank
Truck |
| TLD
|
Intermodal
Trailer/Container Load (Rail) |
| TNK
|
Tank
|
| TRC
|
Tierce
|
| TRK
|
Trunk
and Chest |
| TRU
|
Truck
|
| TRY
|
Tray
|
| TSS
|
Trunk,
Salesmen Sample |
| TUB
|
Tub
|
| UNP
|
Unpacked
|
| UNT
|
Unit
|
| UVQ
|
Wrapped
in Plastic |
| VEH
|
Vehicles
|
| VIL
|
Vial
|
| VOC
|
Vehicle
in Operating Condition |
| VPK
|
Van
Pack |
| VP
|
Vacuum
Packed |
| WHE
|
On
Own Wheel |
| WLC
|
Wheeled
Carrier |
| WRP
|
Wrapped
|
|
|
|
|
|
|
Packaging
Material Code
Packaging
Material Code List Maintenance
Agency |
|
|
| Attribute Name
|
Comments
|
| Code
|
Code
Description |
| packagingMaterialCode
|
Part
of PackagingMaterialType class. It
is String 1 to 3 characters. The
BRD states “Code source needs to be defined. Currently a
EuropeanUnion table of code lists exists for this
requirement”.
However,
it would seem that the packagingMaterialCodeListMaintenanceAgency would
qualify this attribute since the agency code is required if this
attribute is populated.
The definition should read: “The code specifying the
packaging material from the code list identified in
packagingMaterialCodeListMaintenanceAgency.
|
| packagingMaterialCodeListMaintenanceAgency
|
Part
of PackagingMaterialType class. It
is String 1 to 3 characters. This
should be an EAN*UCC maintained code List. Values should be
|
| 1
|
UN/CEFACT
– Recommendation 21
Codes for Passengers, Types of Cargo, Packages, and Packaging Material.
Available at http://www.unece.org/cefact/
|
| E
|
EANUCC
maintained Packaging Material code list.
(see appendix for code list) |
|
|
|
Packaging
Terms and Conditions |
|
|
| Attribute Name
|
Comments
|
| Code
|
Code
Description |
| packagingTermsAndConditions
|
Part of PackagingMaterialType class. It is String 1 to 3
characters. The BRD
states authorized values based on EANCOM 7073, X12 DE102 and X12 DE399. The following list
represents DE 7073 and DE399; DE102 does not apply.
This should be an EAN*UCC maintained
code List. Values
should be: |
| 1 |
Packaging cost paid by supplier
The
cost of packaging is paid by the supplier
|
| 2 |
Packaging cost paid by recipient.
The
cost of packaging is paid by the recipient
|
| 3 |
Packaging cost not charged (returnable)
There
is no charge for packaging because it is returnable.
|
| 4 |
Safe return deposit
A
deposit paid to guarantee the safe return of the package.
|
| 5 |
Not reusable
The
package is not reusable. The
equipment may only be used once and is not reusable for the purpose for
which it was designed
|
| 6 |
Package exchangeable at the point of delivery
The
package may be exchanged at the point of delivery.
|
| 7 |
Repack in
Code
identifying that goods should be repacked from the identified package.
|
| 8 |
Unpack from
Code
identifying that goods should be unpacked from the identified package.
|
| 9 |
Pack in
Code
identifying that goods should be packed from the identified package.
|
| 10 |
Rented
The
package has been/will be rented from a rental agency (e.g. CHEP
pallets).
|
| 11 |
Labelled
The
package is labelled
|
|
|
|
|
|
|
Pallet
Type Code |
|
|
|
Attribute Name
|
Comments
|
|
Code
|
Code Description
|
| palletTypeCode |
Part
of TradeItemPalletInformation class.
It is String 1 to 3 characters. The descriptions are from
X12 DE883 and EANCOM DE7065. This should be an EAN*UCC maintained code
List. Values should
be |
| 1 |
Soft Wood |
| 2 |
Aluminum |
| 3 |
As Specified by the Department of Transportation
(DOT) |
| 4 |
Hard Wood |
| 5 |
Metal |
| 6 |
Standard |
| 7 |
Steel |
| 8 |
Wood |
| 9 |
Slip sheet
Typically
cardboard or plastic sheets used to hold product for storage or
transportation |
| 10 |
Pallet ISO 0 - 1/2 EURO Pallet
Standard
pallet with dimensions 80 X 60 cm. |
| 11 |
Pallet ISO 1 - 1/1 EURO Pallet
Standard
pallet with dimensions 80 X 120 cm. |
| 12 |
Pallet ISO 2
Standard
pallet with dimensions 100 X 120 cm. |
| 13 |
1/4 EURO Pallet
Standard
pallet with dimensions 60 X 40 cm. |
| 14 |
1/8 EURO Pallet
Standard
pallet with dimensions 40 X 30 cm. |
| 15 |
Synthetic pallet ISO 1
A
standard pallet with standard dimensions 80*120cm made of a synthetic
material for hygienic reasons. |
| 16 |
Synthetic pallet ISO 2
A
standard pallet with standard dimensions 100*120cm made of a synthetic
material for hygienic reasons. |
| 17 |
Wholesaler pallet
Pallet
provided by the wholesaler |
| 18 |
Pallet 80 X 100 cm
Pallet
with dimensions 80 X 100 cm. |
| 19 |
Pallet 60 X 100 cm
Pallet
with dimensions 60 X 100 cm. |
| 20 |
Pallet, modular, collars 80cms * 100cms
|
| 21 |
Pallet, modular, collars 80cms * 120cms
|
| 22 |
CHEP Pallet 40 X 60 cm
|
| 23 |
CHEP Pallet 80 X 120 cm
|
| 24 |
CHEP Pallet 100 X 120 cm
|
| 25 |
AS 4068-1993
Australian
Pallet with dimension 115.5 X 116.5 cm
|
|
|
|
|
|
|
Pallet Terms and
Conditions |
|
|
| Attribute Name
|
Comments
|
| Code
|
Code
Description |
| palletTermsAndConditions
|
Part
of TradeItemPalletInformation class.
It is String 1 to 2 characters. List of authorized
values based on EANCOM 7073, X12 DE102 and X12 DE399. This is the same code source
referenced by packagingTermsAndConditions
This should be an EAN*UCC maintained
code list. It should be extended to 1 to 3 characters.
Values should be
|
| 1
|
No Exchange / No Return Pallet
|
| 2
|
Exchange Pallets
|
| 3
|
Return Pallets |
| 4
|
Pallets to be Purchased by Customer
|
| 5
|
Pallet – Third Party Exchange
A
pallet exchange program where a third party rents pallets for internal
or external use. |
| 6
|
One-way pallet
Pallet
need not be returned to the point of expedition.
|
| 7
|
Returnable pallet
Pallet
must be returned to the point of expedition.
|
|
|
|
GS1
Packaging Material
Codes
|
|
|
| Attribute Name
|
Comments
|
| Code
|
Code
Description |
| packagingMaterialCode
|
The following is the two-character code list to be
used with element packageMaterialCode when
packageMaterialCodeListMaintenanceAgency contains a value of
“E”. |
| 01 |
Aluminium
|
| 03 |
Hard
Wood |
| 04 |
As
Specified by the DOT |
| 05 |
Soft
Wood |
| 07 |
Burlap
|
| 10 |
Chemically
Hardened Fibre |
| 13 |
Cloth
|
| 16 |
Cloth
Top |
| 19 |
Cloth
or Fabric |
| 22 |
Compressed
|
| 25 |
Corrugated
or Solid |
| 28 |
Double-wall
Paper |
| 31 |
Fibre
|
| 34 |
Fibre
(Paperboard) |
| 37 |
Fiberboard
|
| 40 |
Fiberboard
Metal |
| 43 |
Glass
|
| 46 |
In
Inner Containers |
| 48 |
Wire/Cord
Something
that binds, ties, or encircles the package/container to secure and
maintain unit integrity |
| 49 |
Insulated
|
| 50 |
Steel
- Vinyl Coated
Steel
that has been covered with a plastic material
|
| 51 |
Wire
Mesh |
| 52 |
Iron
or Steel |
| 53 |
Jumbo
|
| 54 |
Special
Jumbo |
| 55 |
Lead
|
| 58 |
Metal
|
| 59 |
Metal
Cans |
| 61 |
Moisture
Resistant |
| 64 |
Molded
Plastic |
| 67 |
Multiple-wall
Paper (2 or more walls) |
| 70 |
Multiple-wall
Paper (3 or more walls) |
| 71 |
Not
Otherwise Specified |
| 72 |
Paper
– VCI
Water-resistant
paper that is treated by the addition of materials to provide
resistance to damage or deterioration by water in liquid form
|
| 73 |
Other
than Glass |
| 74 |
Other
than Metal or Plastic Tubes, or Glass
|
| 75 |
Plastic
- Vacuum Formed
Packaging
material that is formed by heating plastic sheet and drawing it against
the mold surface by evacuating the air between the sheet and the mold
|
| 76 |
Paper
|
| 77 |
Plastic
- Structural Foam
A
method of manufacturing containers and shipping devices by mixing
plastic resins with a foaming agent, heating it and injecting the mix
into a two-piece machined aluminum mold
|
| 78 |
Plastic
- Injection Molded
Packaging
material that is formed by melting the material and then forcing it
under pressure into a cavity of a closed mold
|
| 79 |
Plastic
|
| 80 |
Polyethylene
Lined |
| 81 |
Plastic
– Virgin
Plastic
in the form of pellets, granules, powder, floc, or liquid that has not
been subjected to use or processing other than for its initial
manufacture |
| 82 |
Pulpboard
|
| 83 |
Plastic
– Regrind
A
plastic prepared from discarded articles that have been reprocessed,
often changing some of its original properties
|
| 84 |
Polystyrene
A
polymer prepared by the polymerization of styrene as the sole monomer
|
| 85 |
Rubber
|
| 86 |
Foam
In
packaging, a cushioning material used to reduce shock and vibration or
abrasion |
| 88 |
Rubber
and Fabric |
| 89 |
Special
|
| 90 |
Standard
|
| 91 |
Stainless
Steel |
| 92 |
Tubes,
Metal or Plastic |
| 94 |
Wood
|
| 95 |
Single
Wall Corrugated Board
The
structure formed by one corrugated inner member between two flat
facings; also known as double face |
| 96 |
Double
Wall Corrugated Board
The
structure formed by three flat facings and two intermediate corrugated
members |
| 97 |
Triple
Wall Corrugated Board
The
structure formed by four flat facings and three intermediate corrugated
members |
|
|
|
The
table below lists all of
the attributes whose values are contained in code lists. The Item team
created
a subgroup to handle the code lists. The work of the subgroup was based
on the
following: |
|
|
- Identifying which
data
elements require a code list
- When maintaining
body
or agency exists, refer to the body or agency
- When required,
define
unique list of valid values, using existing lists or documentation
(E.g. EANCOM
and X12)
|
|
|
The subgroup’s objective was
to keep the lists as short as possible, removing inconsistent,
repeated,
unclear or too generic values and also removing information handled
through
other data elements (E.g., Hazardous related information is handled by
specific
Des).
The issue of governance and
maintenance of these code lists is still being developed. Several of
the code
lists are maintained by outside agencies such as ISO. Other code lists
are
unique to this data model, and will need to be maintained by an GS1
entity.
The table enclosed in the following page
represents the work of the group at the time this document was released
for
Align BRG’s approval. A separate and more complete Addendum
may need to be
added at a later time. |
|
|
| Attributes with
Code List |
| Class
Name |
Item
Name |
Code
List |
|
TargetMarketInformation
|
targetMarketCountryCode
|
Country Codes ISO3166-1
|
|
TargetMarketInformation
|
targetMarketSubdivisionCode
|
Country Subdivision Code ISO3166-2
|
|
TradeItemPriceDateInformation
|
cataloguePrice
|
Codes for the repres. of currencies and
funds ISO 4217:2001
|
|
TradeItemPriceDateInformation
|
suggestedRetailPrice
|
Codes for the repres. of currencies and
funds ISO 4217:2001
|
|
PriceOnTradeItem
|
retailPriceOnTradeItem
|
Codes for the repres.of agencies and codesISO
4217;2001
|
|
TradeItemClassification
|
classificationCategoryCode
|
Classification Attribute Type Code
|
|
EANUCCTradeItemClassification
|
eANUCCClassificationAttributeTypeCode
|
Classification Attribute Type Code
|
|
EANUCCTradeItemClassificationValue
|
eANUCCClassificationAttributeValueCode
|
Classification Attribute Value Code
|
|
ClassificationCategory
|
additionalClassificationAgencyName
|
Code List responsible agency
|
|
TradeItemDescriptionInformation
|
invoiceName
|
Codes for the representation of names of
languages -Part 1: Alpha-2 code- ISO 639-1
|
|
TradeItemDescriptionInformation
|
descriptionShort
|
Codes for the representation of names of
languages -Part 1: Alpha-2 code- ISO 639-1
|
|
TradeItemDescriptionInformation
|
tradeItemFormDescription
|
Codes for the representation of names of
languages -Part 1: Alpha-2 code- ISO 639-1
|
|
TradeItemColorDescription
|
tradeItemcolorDescription
|
Codes for the representation of names of
languages -Part 1: Alpha-2 code- ISO 639-1
|
|
TradeItemColorDescription
|
colorCodeListAgency
|
Code list responsible agency
|
|
TradeItemSizeDescription
|
sizeCodeListAgency
|
Code list responsible agency
|
|
TradeItemMeasurements
|
ingredientStrength
|
Measure Unit Qualifier
|
|
TradeItemMeasurements
|
genericIngredientStrength
|
Measure Unit Qualifier
|
|
TradeItemMarking
|
hasBatchNumber
|
Batch Lot Number Indicator Code
|
|
OrganicTradeItemCharacteristics
|
organicTradeItemCode
|
Organic Item Code List
|
|
TradeItemMeasurements
|
height
|
Measure Unit Qualifier -
|
|
TradeItemMeasurements
|
width
|
Measure Unit Qualifier
|
|
TradeItemMeasurements
|
depth
|
Measure Unit Qualifier
|
|
TradeItemMeasurements
|
grossWeight
|
Measure Unit Qualifier
|
|
TradeItemMeasurements
|
netWeight
|
Measure Unit Qualifier
|
|
TradeItemMeasurements
|
diameter
|
Measure Unit Qualifier
|
|
TradeItemMeasurements
|
drainedWeight
|
Measure Unit Qualifier
|
|
PackagingType
|
packagingTypeCode
|
Type of Packaging Identification - Merger of
EANCOM DE7065 & X12 DE103
|
|
TradeItemMeasurements
|
pegHorizontal
|
Measure Unit Qualifier
|
|
TradeItemMeasurements
|
pegVertical
|
Measure Unit Qualifier
|
|
PackagingMaterial
|
packagingMaterialCode
|
Defined by local agencies
|
|
PackagingMaterial
|
packagingMaterialCompositionQuantity
|
Measure Unit Qualifier
|
|
PackagingMaterial
|
packagingTermsAndConditions
|
Packaging Terms and Conditions
|
|
TradeItemHandlingInformation
|
stackingWeightMaximum
|
Measure Unit Qualifier
|
|
TradeItemTemperatureInformation
|
storageHandlingTemperatureMaximum
|
Measure Unit Qualifier
|
|
TradeItemTemperatureInformation
|
storageHandlingTemperatureMinimum
|
Measure Unit Qualifier
|
|
TradeItemHandlingInformation
|
handlingInstructionsCode
|
Handling Instructions
|
|
TradeItemHandlingInformation
|
minimumTradeItemLifespanFromTimeOfArrival
|
Unit of Time Period
|
|
TradeItemTemperatureInformation
|
deliveryToMarketTemperatureMaximum
|
Measure Unit Qualifier
|
|
TradeItemTemperatureInformation
|
deliveryToMarketTemperatureMinimum
|
Measure Unit Qualifier
|
|
TradeItemTemperatureInformation
|
deliveryToDistributionCenterTemperatureMaximum
|
Measure Unit Qualifier
|
|
TradeItemTemperatureInformation
|
deliveryToDistributionCenterTemperatureMinimum
|
Measure Unit Qualifier
|
|
TradeItemOrderInformation
|
orderingLeadTime
|
Unit of Time Period
|
|
TradeItemCountryOfOrigin
|
countryOfOrigin
|
Country Codes ISO3166-1
|
|
TradeItemPalletInformation
|
palletTypeCode
|
Type of Packages Identification- Merger of EANCOM
DE7065 & X12 DE103
|
|
TradeItemPalletInformation
|
palletTermsAndConditions
|
Packaging Terms and Conditions
|
|
TradeItemHazardousInformation
|
dangerousGoodsRegulationCode
|
Dangerous Goods Regulations
|
|
PackagingMaterial
|
packagingMaterialCodeListMaintenanceAgency
|
Household Packaging Recovery and Recycling
Agencies
|
|
TradeItemHazardousInformation
|
unitedNationsDangerousGoodsNumber
|
UNDG Number -DE7124
|
|
TradeItemHazardousInformation
|
classOfDangerousGoods
|
UN -Class of Dangerous Goods
|
|
TradeItemHazardousInformation
|
flashPointTemperature
|
Measure Unit Qualifier
|
|
TradeItemDescriptionInformation
|
productRange
|
Codes for the representation of names of
languages -- Part 1:Alpha-2 code -ISO 639-1
|
|
TradeItemDescriptionInformation
|
functionalName
|
Codes for the representation of names of
languages -- Part 1:Alpha-2 code -ISO 639-1
|
|
TradeItemSizeDescription
|
descriptiveSize
|
Codes for the representation of names of
languages -- Part 1:Alpha-2 code -ISO 639-1
|
|
TradeItemDescriptionInformation
|
tradeItemDescription
|
Codes for the representation of names of
languages -- Part 1:Alpha-2 code -ISO 639-1
|
|
TradeItemDescriptionInformation
|
variant
|
Codes for the representation of names of
languages -- Part 1:Alpha-2 code -ISO 639-1
|
|
|
|
|
|
|
|
|
|
Back
to Implementation
Considerations |
|
|
GTIN Hierarchy |
|
|
Product
Classification |
|
|
Product
Orientation |
|
|
Language |
|
|
Currency |
|
|
Unit
of Measure |
|
|
Product
Description |
|
|
Attribute Variations |
|
|
Relationship to
Global Data Synchronisation |
|
|
Message Description |
|
