Data Element & Code Sets Directory
Security error, coded
 
Identifies the security error causing the rejection of the EDIFACT structure.

Notes:
1. This element shall specify the security error encountered. These may be the reason for non-acknowledgement by a request for secure acknowledgement, or may be sent on the initiative of the receiver of an AUTACK or secured EDIFACT structure which contains error.
       
   
S
Old Code
 
 
1
=
Wrong authenticator
The validation is wrong.
     
 
2
=
Wrong certificate
The certificate is wrong.
     
 
3
=
Certification path
The certification path is incomplete. Cannot verify.
     
 
4
=
Algorithm not supported
The algorithm is not supported.
     
 
5
=
Hashing method not supported
The hashing method is not supported.
     
 
6
=
Protocol error
The stated protocol has not been followed.
     
 
7
=
Security expected but not present
It was expected the user message would be secured (e.g. using integrated message security or the AUTACK message in authentication mode), but this was not present or received in the expected time period.
     
 
8
=
Security parameters do not match those expected
The parameters specifying the applied security do not match those expected (e.g. from an interchange agreement).
     
 
© Copyright GS1
Edition 2016 Upd. 2021